PSE250-series 150 to 250W
Input / Output
- Optimized input voltage ranges.
- Single outputs from 12 to 48V.
- Reverse input voltage protection.
Operation
- High efficiency. >88%
- Operating temperature range
- -25 to +70°C.
- Fully encapsulated, meets IP30 as standard.
- Convection cooled.
- Low voltage alarm, with logic signal.
Features
- Conformally coating, tropic.
- Under voltage logic alarm.
- Accesible from front panel:
- Output voltage adjustment.
- Output voltage measurement.
- Output OK status green LED.
EMC
- EN61000-6-3 Emission.
- EN61000-6-2 Immunity.
- EN/IEC61000-4-4, 4kV.
- EN/IEC61000-4-5 level 2 & 3.
Output ratings and type code
Output | Input | ||||||
Voltage | Current | Power | 20 - 32V | 41 - 60V | 93 - 150V | 185 - 300V | Case |
12V | 12.5A | 150W | PSE150 24/12 | PSE150 48/12 | PSE150 110/12 | PSE150 2220/12 | 8TE |
13.2V | 11.3A | 150W | PSE150 24/13.2 | PSE150 48/13.2 | PSE150 110/13.2 | PSE150 220/13.2 | 8TE |
15V | 10.0A | 150W | PSE150 24/15 | PSE150 48/15 | PSE150 110/15 | PSE150 220/15 | 8TE |
24V | 8.3A | 200W | PSE200 24/24 | PSE200 48/24 | PSE200 110/24 | PSE200 220/24 | 8TE |
24V | 10.4A | 250W | PSE250 24/24 | PSE250 48/24 | PSE250 110/24 | PSE250 220/24 | 10TE |
48V | 4.1A | 200W | PSE200 24/48 | PSE200 48/48 | PSE200 110/48 | PSE200 220/48 | 8TE |
48V | 5.22.78A | 250W | PSE250 24/48 | PSE250 48/48 | PSE250 110/48 | PSE250 220/48 | 10TE |
How to read our product code:
Example PSE250 48/24
PSE250 = Family code
48 = input voltage code 48
24 = output voltage 24V
DC inputs mobile | ||
Uin 0.1s- S2 | Continous range | Code |
14.4 - 33.6Vd.c. | 16.8 - 30Vd.c. | 24T |
21.6 - 50.4Vd.c. | 25.2 - 45Vd.c. | 36T |
28.8 - 67.2Vd.c. | 33.6 - 60Vd.c. | 48T |
43.2 - 100.8Vd.c. | 50.4 - 90Vd.c. | 72T |
66 - 154Vd.c. | 77 - 137.5Vd.c. | 110T |
The total output power can be derated on a T-range
compared to the above output rating table.
Output | ||
Voltage | Output Current | Power |
12V | 12.5A | 150W |
13.2V | 11.3A | 150W |
15V | 10.0A | 150W |
24V | 8.3 - 10.4A | 200 - 250W |
48V | 4.1 - 5.2A | 200 - 250W |
Input and output ratings
Standard input ranges | |||
Nominal inputs | Input range | Stop level | Code |
24 Vd.c. | 18 to 32V | <16.8Vd.c. | 24 |
48 Vd.c. | 38 to 60V | <33.6Vd.c. | 48 |
110 Vd.c. | 88 to 150V | <77Vd.c. | 110 |
220, 250 Vd.c. | 175 to 300V | <154Vd.c. | 220 |
Other input ranges on demand.
Input range: The range we guaranty full output performance, Uout +10% Iout +5%.
Stop level: The converter works down to the stop level.
The output voltage might decrease to approx -10% of nominal output at the stop level.
Other input and outputs combination on demand.
Other input and outputs combination on demand.
DC/DC Converters PSE250
Updated: March 06, 2006
Polyamp AB
Box 229
SE-597 25 Åtvidaberg, Sweden
Tel: +46 120 854 00 Fax: +46 120 854 05
All Rights Reserved © Polyamp AB
e-mail: Polyamp
Webmaster: Webmaster
Site Made by Teknorama Soft
