CANopen and PROFIBUS interfaces

CANopen & PROFIBUS network interface for laboratory power supplies

CANopen or ROFIBUS PSC module to be build into a Delta Elektronika laboratory power supply. The laboratory power supplies can be included in such buses in test systems. Data and power supply is galvanically insulated 600Vd.c. to avoid earth potential measurements problems.

2pcs 14-bits ADC channels used for programming voltage and current.
2pcs 14 bits DAC channels used to read back of voltage and current.
CANopen bus with up to 127 node addresses, adjustable bus speed 10kbit/s to 1 Mbit/s
PROFIBUS with up to 127 slave addresses up to 12Mbit/s.
Calibration made by software, no potentiometers.
Note: The interface can only be built inside a laboratory power supply at the Delta factory. The board will then be calibrated.
Download datasheet CANopen bus and PROFIBUS
Download software (select on the list)

Type	Description	Analog chanels	Digital chanels	Mechanic
PSC-CAN	CANopen	2x14bit in	2x14bit	Intern
PSC-PB	PROFIBUS	2x14bit in	2x14bit	Intern

{FacileForms:ContactWeb_Text_en,1,0}

Last Updated on Friday, 05 August 2011 16:39

Search

Login

Site guide

CANopen control of

most of the 150W till 6kW output power lab power supplies from Delta Elektronika is now possible, with a built-in 14bit interface.

N+1 DC/DC systems

convection cooled N+1 modular system for 24Vd.c. up to 125Vd.c. outputs. 500W - 3kW in a 19" sub rack from Polyamp.

Why using a slow GPIB

when a fast Ethernet interface exist to program lab Power Supplies? It works on other brands as well with analogue input. Control voltage, current and use digital in- and output signals for an ATM setup.

Modular power supply

N+1 systems for 24V, 48V up to 220Vd.c. output voltage. 800W - 4.8kW in one 3U 19" subrack from Powernet.

Besökare

Idag8
Igår145
Denna vecka328
Månad940
Alla37876

Newsflash

Our Åtvidaberg plant is expanded and refurbished we also a new entrace. The reason is increased demand of our DC/DC converters and that the production of the Systems division products has also been moved to the plant. In connection with the expansion we also changed the energy system and are using heat pumps charged by the Swedish Granite ground.