Skip to content
English (United Kingdom)Svenska (Sverige)

Static switch in inverter and UPS applications

Print E-mail
Powernet 7.5kVA or 30 kVA static switch

An AC/AC UPS system runs mainly on the utility AC in normal operation. The Inverter system is stand-by and operates only at AC failures. The static switch permits a smooth switch over between battery backed up supply and utility supplied AC.
Can be remote controlled to permit selection between on-line or off-line applications. A manual by-pass can also be provided.
bpu_2u mbp68400
7.5kVA static switch 1.5U 19"-rack mount 30kVA static switch, with manual by-pass, 3U 19" rack









Presentation of the DC/AC Inverter modules
Presentation of the DC/AC Inverter systems
Last Updated on Friday, 12 March 2010 18:46
 
Banner
Banner

Site guide

CANopen control of

most of the 150W till 6kW output power lab power supplies from Delta Elektronika is now possible, with a built-in 14bit interface.
 

N+1 DC/DC systems

convection cooled N+1 modular system for 24Vd.c. up to 125Vd.c. outputs. 500W - 3kW in a 19" sub rack from Polyamp.
 

Why using a slow GPIB

when a fast Ethernet interface exist to program lab Power Supplies? It works on other brands as well with analogue input. Control voltage, current and use digital in- and output signals for an ATM setup.
 

Modular power supply

N+1 systems for 24V, 48V up to 220Vd.c. output voltage. 800W - 4.8kW in one 3U 19" subrack from Powernet.

Newsletter