300 - 800W DC/DC converters 6HE, 8TE eller vägg

PSC600-series 300W, 400W, 600W, 800W

The PSC600 series convection cooled DC-DC Converters has a wide range of input and output combinations. The basic mechanical design is based around the Euro format 6HE 230 mm depth with two DIN 41612 H15 connectors on the back. However due to its sturdy aluminum case it can also be mounted in vehicle chassis or other type of cabinets. The basic design can accommodate two extra coolers to supply higher power or provide higher operating temperatures (e.g. EN 50155 T3). The input output can also be supplied with M6 studs or circular connectors for Military applications with high demands on EMC immunity and also up to IP64 ingression classification. Polyamp can also provide so called hot swap power systems in 6U 19”-rack units or special ruggedized cabinets for mobile applications. Very high practical MTBF and CE marked as fee standing unit. Operating temperature range -25 to +70°C.

Get >> Datasheet Manual

Input / Output Optimized input voltage ranges Input voltage ranges from 20 to 300Vd.c. Outputs from 5 to 125 Vd.c. Reverse voltage protected on input and output Low ripple and noise Zero current inrush current limit	EMC, Safety & Environment base for CE mark EN60950 class I EN61000-6-3 Emission EN61000-6-2 Immunity EN/IEC61000-4-4, 4kV EN/IEC61000-4-5 level 2 & 3 EN50121-3-2 & EN50121-3-2-4 IEC62236-3-2 & IEC62236-4 RoHS lead free soldered optionally
Operation High efficiency >89% Operating temperature range -25 to +70°C Fully encapsulated IP20 Convection cooled Under voltage alarm with logic signal. Optional relay output.	Features Conformal coated Accessible from front panel: Output voltage adjustment. Output voltage measurement Output OK status green LED

Output rating and type code

Output			Input voltage range
Voltage	Current	Power	20 - 32 V	41 - 60 V	93 - 150 V	187 - 300 V	Case
5 V	60 A	300 W	PSC300 24/5	PSC300 48/5	PSC300 110/5	PSC300 220/5	46 mm
12 V	33 A	400 W	PSC400 24/12	PSC400 48/12	PSC400 110/12	PSC400 220/12	46 mm
12 V	60 A	720 W	--	PSC700 48/12	PSC700 110/12	PSC700 220/12	66 mm
15 V	27 A	400 W	PSC400 24/15	PSC400 48/15	PSC400 110/15	PSC400 220/15	46 mm
15 V	54 A	800 W	--	PSC800 48/15	PSC800 110/15	PSC800 220/15	56 mm
24 V	25 A	600 W	PSC600 24/24	PSC600 48/24	PSC600 110/24	PSC600 220/24	46 mm
24 V	33 A	800 W	--	PSC800 48/24	PSC800 110/24	PSC800 220/24	56 mm
48 V	12.5 A	600 W	PSC600 24/48	PSC600 48/48	PSC600 110/48	PSC600 220/48	46 mm
48 V	17 A	800 W	--	PSC800 48/48	PSC800 110/48	PSC800 220/48	56 mm
110 V	5.5 A	600 W	PSC600 24/110	PSC600 48/110	PSC600 110/110	PSC600 220/110	46 mm
110 V	7.3 A	800 W	--	PSC800 48/110	PSC800 110/110	PSC800 220/110	56 mm
125 V	4.8 A	600 W	PSC600 24/125	PSC600 48/125	PSC600 110/125	PSC600 220/125	46 mm
125 V	6.4 A	800 W	--	PSC800 48/125	PSC800 110/125	PSC800 220/125	56 mm

How to read our product code:
E.g. PSC600 110/24
PSC600 = family code
110 = input voltage code 110
24 = output voltage 24V

Input voltage rating

Nominal input	Input voltage range	Stop level	Code
24 Vd.c.	20 - 32 V	<16.8 Vd.c.	24
48 Vd.c.	41 - 60 V	<33.6 Vd.c.	48
110, 127 Vd.c.	93 - 150 V	<77 Vd.c.	110
220, 250 Vd.c.	187 - 300 V	<154 Vd.c.	220

Input voltage range: The range where we guaranty full operation, Vout +10%, Aout +5%.
Stop level: The converter works down to the stop level, the output might drop to -10% of nominal output.
Input voltage ranges that meets Railway standard EN50155/IEC60571 or other standards, can be provided on request.