Skip to content
English (United Kingdom)Svenska (Sverige)

FAQ

Shall I use a fuse on the load?

Print E-mail
If you only have one load/equipment connected to the output the electronic current limit will act much faster than a fuse. Therefore you do not need to fuse the load.
If you use several loads we recommend that you read the installation_manual of the model family of interest.
Last Updated on Monday, 04 January 2010 08:53
 
Banner
Banner

Site guide

CANopen control of

most of the 150W till 6kW output power lab power supplies from Delta Elektronika is now possible, with a built-in 14bit interface.
 

N+1 DC/DC systems

convection cooled N+1 modular system for 24Vd.c. up to 125Vd.c. outputs. 500W - 3kW in a 19" sub rack from Polyamp.
 

Why using a slow GPIB

when a fast Ethernet interface exist to program lab Power Supplies? It works on other brands as well with analogue input. Control voltage, current and use digital in- and output signals for an ATM setup.
 

Modular power supply

N+1 systems for 24V, 48V up to 220Vd.c. output voltage. 800W - 4.8kW in one 3U 19" subrack from Powernet.

Newsletter