Shall I use a fuse on the load?

If you only have one load/equipment connected to the output the electronic current limit will act much faster than a fuse. Therefore you do not need to fuse the load.
If you use several loads we recommend that you read the installation_manual of the model family of interest.

Last Updated on Monday, 04 January 2010 08:53

Search

Site guide

CANopen control of

most of the 150W till 6kW output power lab power supplies from Delta Elektronika is now possible, with a built-in 14bit interface.

N+1 DC/DC systems

convection cooled N+1 modular system for 24Vd.c. up to 125Vd.c. outputs. 500W - 3kW in a 19" sub rack from Polyamp.

Why using a slow GPIB

when a fast Ethernet interface exist to program lab Power Supplies? It works on other brands as well with analogue input. Control voltage, current and use digital in- and output signals for an ATM setup.

Modular power supply

N+1 systems for 24V, 48V up to 220Vd.c. output voltage. 800W - 4.8kW in one 3U 19" subrack from Powernet.

Besökare

Idag33
Igår91
Denna vecka920
Månad541
Alla37477

Newsflash

Our Åtvidaberg plant is expanded and refurbished we also a new entrace. The reason is increased demand of our DC/DC converters and that the production of the Systems division products has also been moved to the plant. In connection with the expansion we also changed the energy system and are using heat pumps charged by the Swedish Granite ground.